CHLORINE DIOXIDE 250 ML

CHLORINE DIOXIDE 250 ML

MODO DE EMPLEO

Dilute in water at a dose of 1 ml of product per liter of water, and leave to act for at least 30 minutes. Do not consume the treated water until the active chlorine level drops below 1.5 ppm. If when measuring the chlorine level it is negligible, repeat the operation until the level of active chlorine in the water is between 0.5-1.5 ppm.
The amount of product to be dosed and the exposure time will always be determined by the quality of the water to be treated. Use with caution, always read labels and product information.

USE WARNING
– When you receive the product, do not open it, refrigerate it until its temperature is less than 10ºC so that the gas does not volatilize.
– Once opened, keep refrigerated.
– Do not leave the product open without the cap so that the chlorine dioxide gas is not lost.
– In case of evaporation of the product gas, the area must be ventilated very well since Chlorine Dioxide is toxic by inhalation.

DANGER INDICATIONS
Eye Irrit. 2: H319 – Causes serious eye irritation.

Important notice:
– Use the biocide product with care. Always read the label and product information before use.
– Absence of chlorine that cannot be verified at the time of preparation.