Chlorite + Activator Kit Batch – HDPE | Aquapurelife

MODO DE EMPLEO

For disinfection of drinking water:
- Use one drop of HCl Activator for each drop of Sodium Chlorite (1:1). Measure 2 drops of sodium chlorite and 2 drops of activator for each liter of water to be treated, in a dry container (non-metallic) regardless of the number of activated drops.
- Wait about 45 seconds until you obtain a golden amber color.
-The mixture needs to be diluted later in water. Add water (>150 ml) to stabilize the activated solution as soon as possible. The intense yellow color indicates the degree of saturation of the CIO2 gas that evaporates over time.
-This yellowish solution must be diluted in the water to be treated as soon as possible to ensure maximum effectiveness, and let it act for at least 30 minutes.
-Do not consume the treated water until the active chlorine level drops below 1.5 ppm. If when measuring the chlorine level it is negligible, repeat the operation until the level of active chlorine in the water is between 0.5-1.5 ppm.
The amount of product to be dosed and the exposure time will always depend on the quality of the water to be treated.
Use with caution, always read labels and product information. Store in a cool, dry place, and in an upright position.
Do not expose to sunlight to avoid degradation. It is not necessary to keep the containers in the refrigerator at reasonable temperatures when the ambient temperature is below 22-24º C.