Sodium Chlorite 25% – Plastic/Glass | Aquapurelife

INSTRUCTIONS FOR USE

For disinfection of drinking water:
- Use one drop of HCl Activator for each drop of Sodium Chlorite (1:1) Dose 2 drops of sodium chlorite and 2 drops of activator for each liter of water to be treated, in a dry (non-metallic) container, regardless of the number of activated drops.
- Wait about 45 seconds until you get a golden amber color.
-The mixture must be subsequently diluted in water. Add water (>150 ml) to stabilize the activated solution as quickly as possible. The intense yellow color indicates the degree of saturation of the CIO2 gas, which evaporates over time.
-This yellowish solution should be diluted in the water to be treated as soon as possible to ensure maximum effectiveness, and left to act for at least 30 minutes.
-Do not consume treated water until the active chlorine level drops below 1.5 ppm. If the chlorine level is negligible when measured, repeat the procedure until the active chlorine level in the water is between 0.5 and 1.5 ppm.
The amount of product to be dosed and the exposure time will always depend on the quality of the water to be treated.
Use with caution, always read labels and product information. Store in a cool, dry place, upright.
Do not expose to sunlight to prevent deterioration. It is not necessary to keep containers refrigerated at reasonable temperatures when the ambient temperature is below 22-24°C.