CHLORINE DIOXIDE 125 ML

CHLORINE DIOXIDE 125 ML

MODO DE EMPLEO

Dilute in water at a dose of 1 ml of product per litre of water and leave to act for at least 30 minutes. Do not consume the treated water until the active chlorine level drops below 1.5 ppm. If the chlorine level is not noticeable when measuring, repeat the operation until the active chlorine level in the water is between 0.5-1.5 ppm. The amount of product to be dosed and the exposure time will always be determined by the quality of the water to be treated. Use with caution, always read the labels and information on the product. WARNING ON USE – When you receive the product, do not open it, refrigerate it until its temperature is below 10ºC so that the gas does not volatilise. – Once opened, keep refrigerated. – Do not leave the product open without the cap so that the chlorine dioxide gas is not lost. – In case of evaporation of gas from the product, the area must be well ventilated as Chlorine Dioxide is toxic if inhaled. DANGER INDICATIONS Eye Irrit. 2: H319 – Causes serious eye irritation. Important notice: – Use the biocidal product with care. Always read the label and product information before use. – Absence of chlorine not verifiable at the time of preparation.